Prospero since 1972


Linear Rinsing
Linear HP Filling
Gas Injection
Vacuum Corking
Crown Capping
Screw Capping


The electropneumatic rinser allows regulating from control board the timing of the injection into the bottle and the timing of drainage. These para- meters can be related to the bottle size used and saved in the machine’s memory. The bottle is gripped at the neck by a universal floating gripper in order to reduce to the minimum the format change. The gripper belongs to a chain system with step motor that lifts the bottle and turns it upside down on the injector. The nozzle enters into the bottleneck by 70mm; this depth ensures that there is no interference between the injected water and the return water. The nozzle opens only in presence of a bottle, without any contact between the bottle mouth and the injector. The dripping water is recovered in a closed circuit, without wetting the machine under normal conditions.

Explore Our Products

Request a Quote